Additional Information

From transporting a dishwashing machine into your house to attaching the water connections, setting up a dishwashing machine can take up to five hours. A plumber will certainly have the right tools on hand and can install your new dishwasher in under two hours.

 

A Plumber Can Inspect the Supply Lines

A supply line, especially a dishwasher port, attaches the dish washer to a water resource. If you purchase a brand-new supply line, a plumber can make sure that the line is compatible with both your dish washer and also water resource. A professional plumber can inspect it to ensure that it's in good problem as well as does not have any leakages if you choose to utilize an existing supply line.

 

An Improper Installation Can Nullify the Dishwashing machine's Warranty

Before setting up a dishwasher on your own, you need to review the warranty very carefully. Even slightly harming the dishwashing machine throughout the setup procedure can void the warranty. Considering that the expense of a dishwashing machine ranges in between $300 to $1,000 and also upwards, that can be a pricey blunder. Even if the dishwashing machine still functions, you will not have the ability to replace it should it damage quickly. So, unless you are handy as well as have experience installing dish washers, you ought to hire a plumber so you don't risk your service warranty.

 

Installing a Dish Washer Requires a Variety of Tools

If you do not have a selection of devices on hand, you might require to make a journey to Lowe's or Residence Depot. To install a dish washer, you require the adhering to devices: pliers, an adjustable wrench, a collection of screwdrivers, a tube cutter, and opening saws.

 

Not Installing Your Dish Washer Correctly Can Result In a Hill of Problems

Not only can setting up a dish washer correctly nullify your service warranty, yet it can likewise create a mess. If you do not set up the supply line properly, you might deal with leaks-- or also worse, a flooding. You might also experience a "water hammer"-- when the water runs too promptly through your pipelines and also creates loud trembling sounds. If you incorrectly install your dish washer to the trash disposal, you may see poignant scents or have residue on your meals.

 

A Plumber Can Finish the Work Affordably and also Promptly

A plumber can install your dish washer in one to 2 hours. The ordinary plumber won't charge even more than a couple of hundred dollars to install your dishwashing machine.
From transporting a dishwasher into your residence to affixing the water links, setting up a dish washer can take up to five hours. To make your life much easier and to prevent setting up a dishwasher incorrectly, we advise working with a professional plumber. A plumber will have the right devices on hand and also can install your brand-new dishwashing machine in under two hours. A supply line, especially a dishwashing machine port, links the dishwashing machine to a water resource. Unless you are handy as well as have experience installing dishwashing machines, you should work with a plumber so you do not risk your guarantee.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

 

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 

• A screwdriver


• • A hose clamp


• • Duct tape (optional)


• • A brass fitting


• • Teflon tape


• • A pair of pliers


• • An adjustable wrench


• • A drill


• • Braided steel water line


• • A pair of rubber hand gloves (optional)


• • Wire nuts

 

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

 

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

 

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

 

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

 

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

 

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

 

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Click Here!